bumps with lowered altitude!! (lots of great custom bumps!!)

[Pipes71]

man, I got to come across this thread just as I'm getting ready to do the suspension.Marz ride is deffinately sick.. Love the look of black pearl just as much..only thing I got that low is my 50 chop top..sheesh.. now I'm going to go rethink the bumps suspension..thanks alot guys

[RTG_RACING]

hey Randy,


ive seen your truck before but never ran into you on the site .
that f-100 you got will scat prety good won't it. i saw one of your u-tube vids a while back, it looked fast . what powerplant you running.



hey brad randy's truck looks like pearls sister

It has a warmed up 351W bored .030 over with a set of Proline Cyclone heads. Torquer intake, 780 Holley, Comp Cam vavle train. Had it on a chassis dyno a couple of years ago and It made 311hp at the rear wheels. The guy running the dyno said that the motor has around 415- 425hp at the flywheel. He said that I am losing about 100hp thru the drive line.
I have 3 vids on youtube
It runs 8.60 - 8.80's in the 1/8th most of the time. It has ran an 8.55 sec 1/8th mile.

http://img89.imageshack.us/img89/6899/dsc01267og1.jpg
Shot with DSC-H5 at 2008-04-06

Sorry to go OT but do you have headers on that 351w? If so what kind?

[ford4x4fun]

Randy That is SLICK...

[dano31]

A LITTLE LOW BT ITS JUST THE BEGINNING I HAD A MISHAP WITH THE OTHER TRUCK AND THE WHEELS ON THE 68

[dano31]

http://www.fordification.com/forum/view ... hp?t=35421

THAT EXPLATHE MISHAP OF MY TERRIBLE YEAR

[Randy Beck]

hey Randy,

ive seen your truck before but never ran into you on the site .
that f-100 you got will scat prety good won't it. i saw one of your u-tube vids a while back, it looked fast . what powerplant you running.

hey brad randy's truck looks like pearls sister

It has a warmed up 351W bored .030 over with a set of Proline Cyclone heads. Torquer intake, 780 Holley, Comp Cam vavle train. Had it on a chassis dyno a couple of years ago and It made 311hp at the rear wheels. The guy running the dyno said that the motor has around 415- 425hp at the flywheel. He said that I am losing about 100hp thru the drive line.
I have 3 vids on youtube
It runs 8.60 - 8.80's in the 1/8th most of the time. It has ran an 8.55 sec 1/8th mile.

http://img89.imageshack.us/img89/6899/dsc01267og1.jpg
Shot with DSC-H5 at 2008-04-06

Sorry to go OT but do you have headers on that 351w? If so what kind?

I bought a set of 1 1/2" sanderson block hugger headers off ebay. They work OK. I had to cut a small notch in the frame on the passenger side. I've been looking for a deal on a set of 1 5/8" Mustang shorties. I would love to use long tubes, but no one makes them for 351W's in '67-'72 chassis. I tried a set of 302 header. Drivers side fit fine but the pass. side wouldn't clear the starter. I then bought a set of 351W headers for a mid '80's truck. The pass. side fit fine this time and the drivers side was hitting the steering box.



Shot with DSC-H5 at 2007-02-22


Shot with CYBERSHOT at 2006-08-18

[dano31]

HAS ANYONE SEEN THIS ONE

[Joshpow]

Yep saw it at f100 nationals in Knoxville and a classic truck magazine. If I'm not terribly confused, it is the test rat for Fatman fabrications' new front end parts for these trucks. They are building a Mustang II style front axle for these trucks. At least that was the spill in the magazine I bought. Rather clean ride. I'm glad you brought it up dano31.

[convincor]

not mine, just some ebay pics i've saved.

[td]

i love it!!! killer lowerd bumps just keep popin up in this thread.

[td]

so many pages. thought i'd throw the 68 on here again local cruise in.

[marz68]

Oh hell here are a few more of mine to

[dano31]

marz im still amazed at how good yours looks im doing a bit of saving to get my stang II setup.

and td those rims are sick where they another color in the center i looked for some like those for a while and they either didnt make 5x5.5 or the center was black or anthrcite (that one color on the bullet mustang rims)

your seam work looks great

[marz68]

marz im still amazed at how good yours looks im doing a bit of saving to get my stang II setup.

and td those rims are sick where they another color in the center i looked for some like those for a while and they either didnt make 5x5.5 or the center was black or anthrcite (that one color on the bullet mustang rims)

your seam work looks great

Thanks dano31, I sure wish my bolt in suspension was done it would be perfect for you.

[dano31]

marz let me know ill be the first to buy it when its ready i trust you more and i cant find anyone in houston with a reasonable price that will do it
it will fun me 8000 plus a 6 months wait at extensive or should i say expensive