stock exhaust hangers

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
Zorm
Blue Oval Fan
Blue Oval Fan
Posts: 549
Joined: Tue Apr 14, 2009 1:28 pm
Location: Pensacola, Florida

stock exhaust hangers

Post by Zorm »

does anyone know where I can get a new set if they even make them?
1971 F250 Camper Special, family owned since 1972
1983 Cherokee, last of the big ones, bought in Italy, family owned since 1998
1965 Corvair Corsa Convertible, 140 engine, 4 speed.

HE guides my path, forgives me when I stray and lights my life
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: stock exhaust hangers

Post by fordman »

i have seen some on ebay before. i used up all the used ones i had. they are pretty generic though. they are a strap with holes in it with a piece of rubber then another strap with a curve in it to go under the exhaust clamp. there is one that has a loop of rubber but the others were straight rubber that i had.
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: stock exhaust hangers

Post by fordman »

i didnt think to look at any of the vendors. there is a place in south carolnia that has lots of old nos pipe too. it is called park auto. good luck getting them to return your phone call.
Zorm
Blue Oval Fan
Blue Oval Fan
Posts: 549
Joined: Tue Apr 14, 2009 1:28 pm
Location: Pensacola, Florida

Re: stock exhaust hangers

Post by Zorm »

thanks fordman
1971 F250 Camper Special, family owned since 1972
1983 Cherokee, last of the big ones, bought in Italy, family owned since 1998
1965 Corvair Corsa Convertible, 140 engine, 4 speed.

HE guides my path, forgives me when I stray and lights my life
User avatar
67F110
New Member
New Member
Posts: 56
Joined: Fri Oct 09, 2009 4:38 pm

Re: stock exhaust hangers

Post by 67F110 »

They are all over the wrecking yards here in the Pac NW. My '67 lacked exhaust from about the cab back. I had my choice at the U-Pull and harvested the newest looking exhaust, hangers and bolts I could find.
Post Reply