Looking for a good replacement speaker that will fit under the dash in the stock location.
Can anyone link me to one?
Thanks.
Speaker replacements?
Moderator: FORDification
-
- Preferred User
- Posts: 442
- Joined: Tue Aug 02, 2011 11:27 pm
- Location: Tallapoosa, Georgia
Speaker replacements?
My build thread...http://www.fordification.com/forum/view ... 22&t=67317
- HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: Speaker replacements?
Figure out the size and then head over to Crutchfield.com.
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
- Senorpablo
- New Member
- Posts: 40
- Joined: Wed Apr 18, 2012 8:57 pm
- Location: SoCal
Re: Speaker replacements?
I used this one:
http://www.crutchfield.com/p_068R69N/Re ... R-69N.html
You can use the stock bracket, but you need to make a couple bends in it; this speaker is larger and deeper than the stock one.
This is a smaller speaker with a shallower mounting depth. This might drop in with the stock bracket though.
http://www.crutchfield.com/p_068R57N/Re ... erview-tab
Value wise it was just okay. I wasn't blown away with the sound quality, but I don't really have anything to compare it with. It may just be the fact that it's mono and in the middle of the dash. You could probably get away with something less expensive.
http://www.crutchfield.com/p_068R69N/Re ... R-69N.html
You can use the stock bracket, but you need to make a couple bends in it; this speaker is larger and deeper than the stock one.
This is a smaller speaker with a shallower mounting depth. This might drop in with the stock bracket though.
http://www.crutchfield.com/p_068R57N/Re ... erview-tab
Value wise it was just okay. I wasn't blown away with the sound quality, but I don't really have anything to compare it with. It may just be the fact that it's mono and in the middle of the dash. You could probably get away with something less expensive.
-
- Preferred User
- Posts: 442
- Joined: Tue Aug 02, 2011 11:27 pm
- Location: Tallapoosa, Georgia
Re: Speaker replacements?
Thanks guys. I ended up using a similar 6x9 speaker sounds pretty good for a single speaker in the dash!
My build thread...http://www.fordification.com/forum/view ... 22&t=67317