Repo steering wheel trouble
Moderator: FORDification
-
riversideF100
- New Member
- Posts: 2
- Joined: Sun Aug 11, 2019 7:49 pm
Repo steering wheel trouble
I just remove the aftermarket steering wheel that the previous owner had put on and installed a new repo 3 spoke steering wheel and there is about a 1/2 inch gap between the wheel and the shift collar. Any ideas as to why and how to fix? Also I can't get the horn working. (It was before the wheel replacement.) Any good schematics out there on how it should be set up? Thanks.
Russell
1970 F100 Sport Custom
360 / 3 on tree.
1970 F100 Sport Custom
360 / 3 on tree.
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Repo steering wheel trouble
Similar issue. http://www.fordification.com/forum/view ... =5&t=89398
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
riversideF100
- New Member
- Posts: 2
- Joined: Sun Aug 11, 2019 7:49 pm