1972 f100 4x4

Questions about 4WDs and related topics

Moderators: FORDification, Doug Comer

Post Reply
57f100
New Member
New Member
Posts: 10
Joined: Sun Dec 27, 2015 3:29 pm

1972 f100 4x4

Post by 57f100 »

Hi guys, I need some help on a truck I am working on.
I purchased a 72 f100 4x4 recently and have come to a problem. The front axle is missing the left axle shaft. Where can I buy a new shaft and spindle? Are they the same as Bronco?
My next issue is that I live in New Zealand so have to order everything from the USA and I dont want to order the wrong parts.
Many Thanks
tsherry
Preferred User
Preferred User
Posts: 487
Joined: Fri Dec 23, 2005 11:26 pm
Location: Washington, Spokane

Re: 1972 f100 4x4

Post by tsherry »

99.99% chance it's NOT the same as that era of Bronco; I think the tracks are quite a bit different.

We'll need more info from you on what front axle you have. There should be (hopefully) a tag either on the axle, and/or on your VIN door tag that should help narrow it down. Photos of the axle housing will probably help as well. If it's original (here's a link) https://www.fordification.com/tech/schematics_a.htm and https://www.fordification.com/tech/imag ... na447F.jpg

It should be a Dana...but things can get swapped over time.
too many Fords, no where near 'nuff time.

or, money.
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: 1972 f100 4x4

Post by basketcase0302 »

="tsherry"99.99% chance it's NOT the same as that era of Bronco; I think the tracks are quite a bit different.

We'll need more info from you on what front axle you have. There should be (hopefully) a tag either on the axle, and/or on your VIN door tag that should help narrow it down. Photos of the axle housing will probably help as well. If it's original (here's a link) https://www.fordification.com/tech/schematics_a.htm and https://www.fordification.com/tech/imag ... na447F.jpg

It should be a Dana...but things can get swapped over time.
:yt: My early 76' Bronco D-44 front axle was at least 4" narrower than the F series trucks.

Also try Drivetrain Specialties, they've been around for over 30 years.

https://www.drivetrainspecialists.com/
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
cep62
100% FORDified!
100% FORDified!
Posts: 2068
Joined: Sun Oct 26, 2008 8:06 pm
Location: West Michigan

Re: 1972 f100 4x4

Post by cep62 »

I don't know your situation but I would locate a complete axle from a 76-79 F150.
In the USA they come with disc brakes and will bolt right in.
78-9 have a better tie rod setup.
If not try Jeff's Bronco Graveyard. for a axle shaft.
https://broncograveyard.com/
57f100
New Member
New Member
Posts: 10
Joined: Sun Dec 27, 2015 3:29 pm

Re: 1972 f100 4x4

Post by 57f100 »

Thanks for your help guys.
So the 73-79 f100/ f150 has the same front axle ? Same width?
cep62
100% FORDified!
100% FORDified!
Posts: 2068
Joined: Sun Oct 26, 2008 8:06 pm
Location: West Michigan

Re: 1972 f100 4x4

Post by cep62 »

57f100 wrote:So the 73-79 f100/ f150 has the same front axle ? Same width?
In the USA they are .
About 1972 they went to ball joints from the king pins ,
then 76 disc brakes and a power steering option.
Post Reply