overhead
Moderator: FORDification
- Mancar1
- 100% FORDified!
- Posts: 5390
- Joined: Thu Jun 10, 2010 8:13 am
- Location: USS Gramps Garage (DD-727) Tehama County, Northern Ca.
overhead
Posting this at the request of a fellow member.
This is the overhead I made and installed in the 68.
No spots, just glare.
Keep on Trucking.
This is the overhead I made and installed in the 68.
No spots, just glare.
Keep on Trucking.
You do not have the required permissions to view the files attached to this post.
May your sails stay full, and your knots not slip. Unless a slip knot.
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
- duaneo
- Preferred User
- Posts: 269
- Joined: Thu Aug 21, 2014 1:39 pm
- Location: California, Oakland
Re: overhead
Looks nice!
Is that 1/4" finish plywood?
Cheers,
Duane
Is that 1/4" finish plywood?
Cheers,
Duane
1971 F100 - Ugly on the outside, but purty under the hood...
1968 Chevrolet Impala - Family car since 1970, My car since I was 16, in need of bodywork/paint, but otherwise straight.
2004 Mini Cooper S - Daily driver and grown up go-kart
1968 Chevrolet Impala - Family car since 1970, My car since I was 16, in need of bodywork/paint, but otherwise straight.
2004 Mini Cooper S - Daily driver and grown up go-kart
-
- 100% FORDified!
- Posts: 1514
- Joined: Sun Jan 27, 2008 9:24 pm
Re: overhead
That looks good.
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: overhead
Great work John! Looks awesome
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
- Fall_of_Olympus
- New Member
- Posts: 52
- Joined: Mon Nov 17, 2014 12:47 pm
- Contact:
Re: overhead
Good lord that's sexy!
-
- Preferred User
- Posts: 468
- Joined: Fri Jun 18, 2010 7:31 pm
Re: overhead
Very nice work. What do the door panels look like? Is there any other wood grain on the inside of cab?
1964 f100
292 yblock
1969 Ranger
Loving all ford vehicles
292 yblock
1969 Ranger
Loving all ford vehicles
- Mancar1
- 100% FORDified!
- Posts: 5390
- Joined: Thu Jun 10, 2010 8:13 am
- Location: USS Gramps Garage (DD-727) Tehama County, Northern Ca.
Re: overhead
I used the thin door skin material.
I plan on doing the door panels just haven't got to it yet. I did woodwork on a 79 years back and used 3/4 stock for the door panels. The depth allows for doing some creative routing.
I plan on doing the door panels just haven't got to it yet. I did woodwork on a 79 years back and used 3/4 stock for the door panels. The depth allows for doing some creative routing.
You do not have the required permissions to view the files attached to this post.
May your sails stay full, and your knots not slip. Unless a slip knot.
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
- abyars111
- Preferred User
- Posts: 347
- Joined: Wed Apr 18, 2012 1:06 pm
- Location: Decatur, AL
Re: overhead
I really like that headliner!!!
Anthony
1970 F250 Crew Cab 2wd 390/2v short bed
2004 Eddie Bauer Expedition
1955 Chevy 210 4dr Sedan
1970 F250 Crew Cab 2wd 390/2v short bed
2004 Eddie Bauer Expedition
1955 Chevy 210 4dr Sedan
-
- Preferred User
- Posts: 468
- Joined: Fri Jun 18, 2010 7:31 pm
Re: overhead
Now that I would like to see. Don't here much about people doing routing work, if you have good bits and a creative mind, you could do some awesome one off'sMancar1 wrote:I used the thin door skin material.
I plan on doing the door panels just haven't got to it yet. I did woodwork on a 79 years back and used 3/4 stock for the door panels. The depth allows for doing some creative routing.
completely personalizing your own truck.
1964 f100
292 yblock
1969 Ranger
Loving all ford vehicles
292 yblock
1969 Ranger
Loving all ford vehicles
- Mancar1
- 100% FORDified!
- Posts: 5390
- Joined: Thu Jun 10, 2010 8:13 am
- Location: USS Gramps Garage (DD-727) Tehama County, Northern Ca.
Re: overhead
I have enjoyed wood working since age 14. 51 years.
1/2 my shop is mechanical and 1/2 is a wood working
shop.
1/2 my shop is mechanical and 1/2 is a wood working
shop.
May your sails stay full, and your knots not slip. Unless a slip knot.
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact: