Had a custom sticker made for the back window. My buddy has a 66 ford that sits on a 4x4 chevy frame and has a sticker that says "Ford makes it, Chevy shakes it."
Dunno why I'm friends with him
Door panels
Moderator: FORDification
-
ButtaBean
- New Member
- Posts: 53
- Joined: Thu Nov 16, 2017 9:08 pm
Door panels
Had to add some personal touches to my bump. Door panels are done and headliner is awaiting me to stop being lazy.
Had a custom sticker made for the back window. My buddy has a 66 ford that sits on a 4x4 chevy frame and has a sticker that says "Ford makes it, Chevy shakes it."
Dunno why I'm friends with him
Had a custom sticker made for the back window. My buddy has a 66 ford that sits on a 4x4 chevy frame and has a sticker that says "Ford makes it, Chevy shakes it."
Dunno why I'm friends with him
You do not have the required permissions to view the files attached to this post.
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Door panels
Love the door panels and the chebby decal LOL! 
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
ButtaBean
- New Member
- Posts: 53
- Joined: Thu Nov 16, 2017 9:08 pm
Re: Door panels
Haha, Thanks! First time in a while that I have had fun working on a vehicle. This ol bump keeps me looking forward to the next project on it.
I do mechanical and custom work for a living, so its something of a surprise for me to be excited by it.
I do mechanical and custom work for a living, so its something of a surprise for me to be excited by it.
-
fordman
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
-
jzjames
- 100% FORDified!
- Posts: 1782
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: Door panels
Agree with that. The 67-72s are fun to work on.ButtaBean wrote: First time in a while that I have had fun working on a vehicle.
Made in America, Ford Tough.
-
ButtaBean
- New Member
- Posts: 53
- Joined: Thu Nov 16, 2017 9:08 pm
Re: Door panels
Its material over the metalfordman wrote:Is that material over the metal. Or a custom board with material?