I've been reading for a few weeks now, and thought I'd introduce myself.
I recently acquired a 66 F100. My Father-in-law bought it, and my wife grew up going camping in it and going on firewood runs. It had been sitting for a decade or so, and I decided to restore it...or at least give it a shot.
Its a 2WD, 352 V8 (rebuilt once already), long bed, Warner 4 sp manual, custom cab, "camper special" emblemed. Not sure what that last part means.
I haven't done a lot of wrenching, but I have a place to work on it, a cherry picker to pull the engine, and a desire to learn. First on the agenda is a good shop manual, a new starter, and some tires. I'm informed that it had been running fine before the starter went out.
If I can get it in good working order, I'll probably farm out the body work, paint, and interior rehab. I'll attach some pics, and any comments, advice, or words of wisdom would be appreciated.
Mike
Hello. New member from Oregon
Moderator: FORDification
-
- New Member
- Posts: 2
- Joined: Mon Jul 11, 2022 10:37 am
Hello. New member from Oregon
You do not have the required permissions to view the files attached to this post.
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: Hello. New member from Oregon
That’s not a 66.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
- New Member
- Posts: 2
- Joined: Mon Jul 11, 2022 10:37 am
Re: Hello. New member from Oregon
DuckRyder, Thanks for your input. I was told that it was a '67, but I looked at VIN decoder online, and was under the impression the engine was a '66.
Can you tell me what you think it is? Thanks,
Mike
Can you tell me what you think it is? Thanks,
Mike
You do not have the required permissions to view the files attached to this post.
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: Hello. New member from Oregon
https://www.fordification.com/tech/VIN67.htm
I’d say it’s a 67 built in 66 I think I see the unique to 67 heater control (3 knobs).
It’s definitely a bump side, 66 is a different body style.
I’d say it’s a 67 built in 66 I think I see the unique to 67 heater control (3 knobs).
It’s definitely a bump side, 66 is a different body style.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- jzjames
- 100% FORDified!
- Posts: 1781
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: Hello. New member from Oregon
Very nice original ‘67. Little rust.
Not a fan of shiney new paint on vintage trucks if original can be saved, but as they say, “it’s your truck”.
Original paint would be valuable IMO.
Another blank on the ID plate for the body color, but it sure looks like Calypso Coral/ Wimbledon White to me
Hope you try to give the original paint a chance with a good polish to see what you get.
And fire it up and see how it runs, may just run fine. Nice truck!
Not a fan of shiney new paint on vintage trucks if original can be saved, but as they say, “it’s your truck”.
Original paint would be valuable IMO.
Another blank on the ID plate for the body color, but it sure looks like Calypso Coral/ Wimbledon White to me
Hope you try to give the original paint a chance with a good polish to see what you get.
And fire it up and see how it runs, may just run fine. Nice truck!
- jzjames
- 100% FORDified!
- Posts: 1781
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: Hello. New member from Oregon
Another original ‘67 Camper Special on another site. Take a gander;
https://www.ford-trucks.com/forums/1495 ... oject.html
https://www.ford-trucks.com/forums/1495 ... oject.html
-
- New Member
- Posts: 103
- Joined: Wed May 02, 2018 1:58 am
Re: Hello. New member from Oregon
That looks like a neat one! Nice